NTE BUTANE SOLDERING IRON & TORCH and SOLDERING GUN and ELECTRIC CORDED SOLDERING IRONS and ELECTRIC CORDED DE-SOLDERING IRONS

New ECG® Heat Products from NTE Electronics, Inc.

BUTANE SOLDERING IRON & TORCH

View Cart

• J-220 Versa-Torch™ $53.10 - hand-held butane torch • Convenient, light-weight sturdy with removable base • 220 min. refillable butane gas tank • Torch temperature: 1300°C/2500°F • Piezo electric ignition • Adjustable air flow and gas flow control valves • Safety kill/off switch

View Cart

[Image] [Image]

Personal compact torch with Piezo electronic ignition system and a built-in LED is ideal for camping, first aid and survival kits, laboratories, hobbies and everyday household repairs. Ready instantly, this device features an approximate temperature of +2500°F (+1300°C) and a 30 minute run time.

View Cart

BUTANE TORCH

•

View Cart

SOLDERING GUN

View Cart

ECG® J-035 Battery Powered Portable Soldering Iron $15

Economically priced, battery powered, lightweight portable soldering iron that is ideal for repairs where a corded iron is not usable. Applications include automotive, electronic, field service, marine, telecom, etc. Provides the equivalent of a 9 watt iron at +896°F (+480°C), can solder up to 160 joints and run approximately 50 minutes on fully charged batteries (Requires 3 "AA" batteries, not included). Fast start-up feature reaches +365°F (+185°C) in just 12 seconds.

[Image] [Image]

View Cart

BUTANE HEAT GUN

• Model J-900 flameless Heat Gun $57.30 • Temperature adjustable to 1400°F • Operating time up to 120 minutes • Automatic piezo electronic ignition • Deflector shield, rest/stand and spare orifice included

View Cart

[Image] JT-009 Package of 3 tips $3.98

ELECTRIC CORDED DE-SOLDERING IRONS

• Model J-045-DS $12.78 , 45 watt • Temperature 788°F • Long life tip

TIPS AND ACCESSORIES

• JT-001 $9.13 1mm conical replacement tip for J-500 and J-700KT (iron and chrome plated copper pre-tinned)

• JT-002 $9.13 2mm chisel replacement tip for J-500 and J-700KT (iron and chrome plated copper pre-tinned)

• JT-003 $9.96 heat blower and deflector tip for J-500 and J-700

• JT-004 $2.49 two pack butane replacement cartridge for J-300

• JT-101 $1.99 replacement conical tip for J-025 (nickel plated copper); 2 tips/package

• JT-102 $2.99 replacement conical tip for J-060 (nickel plated copper); 2 tips/package

• JT-103 $2.92 replacement tip for J-045-DS (nickel plated copper) 2 tips/package

• JT-104 $3.87 replacement tip for J-100 (nickel plated copper) 2 tips/package

Read Warning label * Department of Transportation Hazardous Materials Regulations FORBID the carriage of butane or other flammable gas products on passenger aircraft. DO NOT pack gas solder iron items in any checked bag or carry-on baggage

BUTANE SOLDERING IRON KIT

• Model J-700KT, $59.95 25 to 80 Watt performance equivalent to a corded soldering iron • Operating time up to 120 minutes • 4-IN-1 use: Soldering: 410° to 850°F (20 sec) Hot Knife: 410° to 850°F (20 sec) Torch: 2500°F (instant) Heat Blower: up to 1300°F (10 sec) • Includes: - Butane soldering iron - protective cap with igniter - 1mm conical tip - Solder - Torch-tip - Wiping sponge - Hot blower tip - Stand - Hot knife tip - Carrying case

View Cart

ELECTRIC CORDED SOLDERING IRONS

• Model J-025 $5.98, 25 Watt - Tip temperature 464°F

• Model J-060 $8.83 , 60 Watt - Tip temperature 860°F

• Long Life Tip (nickel-iron plated copper) • Cool grip rubber handle

This deluxe, swivel base bench vise has a one touch locking level for easy positioning.

[Image]

Features:

3” wide jaw with rubber pads * Ball Joint swivel for * Maximum Performance * Jaw opening 2 1/4” * All Metal Construction * Clamp Opening 2”

HG-001VT ELECTRONIC HEAT GUN With Variable heat $41.99

OTHER JOBS FOR THE HEAT GUN

Removing paint and varnish with hot air jet and scraper.

Removing self-adhesive stickers and trim.

Loosening rusted or overtightened nuts and metal screws.

Thawing frozen pipes, frozen door locks, padlocks, etc.

WARNING: Do not attempt to thaw plastic pipes!

Highlighting the natural woodgrain of wooden surface before staining or varnishing.

Fast drying of paints and varnishes. This is especially useful when color matching is required by adding several coats of the paint or varnish.

Softening old putty before removal and replacement.

Drying out wet, damaged timber prior to filling with compound and refinishing.

Shrinking PVC shrink-wrap sheeting for packaging protection.

Waxing and dewaxing skis.

Shrinking polyvinyl wire joints.

USING THE HEAT GUN

HG-001VT HEAT GUN is very light and easy to use. The heat control allows for low and high working temperature settings as well as an off setting. The low setting is roughly 750°F and the high setting is roughly 1100°F.

Before plugging into the electrical outlet, always make certain the power switch is in the OFF position.

When ready to begin work, set power switch to desired temperature settings. With the HG-001VT HEAT GUN, always allow a minute or so for it to reach its full operating temperature.

Always wear protective gloves and eye protection.

The HG-001VT HEAT GUN is designed with a built-in stand so it can be positioned in an upright (vertical) position only, on any flat, level surface. This frees both hands to easily shape and mold PVC pipe and other materials. Remember to keep hands away from the immediate nozzle area.

DIGITAL INFRARED THERMOMETER

[Image]