STARK
ELECTRONIC 444 FRANKLIN ST WORCESTER MA. 01604
PHONE 508-756-7136 FAX 508-756-5752 TO SEND US AN E-MAIL CLICK HERE
1PK-9402 Metric 7 pc Hex Nut Driver Set $12.83
Extra thin walled metric hex nut driver set, with rubber handles in vinyl storage pouch. 3MM, 3.5MM, 4MM, 4.5MM, 5MM, 5.5MM and 6mm hex nut drivers.
The outer diameter of the head is made narrow for use with D-Sub connector standoffs.
CE-0275 Pin Extractor Set 5 pc. $56.67

Designed to Extract pins from various connectors Molex, Amp, Tyco ect.
contains 5 different size tools.
FLEX HEAD RATCHET WRENCHES

Made of high quality chrome-vanadium steel and fully polished throughout. Needs as little as 5 degrees of sheep to move a fastener. Flex Head rotates 180 degrees. Available in Metric or Inch Sets.
902-117 $45
Multi Angle Swivel-Action Vacu-Vice
CP-391 ALL IN ONE CABLE TACKER $20

All-in-one Staple Gun can be used to tac flat or round cable
Easy to Change Construction allows user to change the staple guide plates easily
900-038
Hex Key Set US and Metric $21.67
900-049
vise 2 ' Max opening *$10
Jaw width, 2.4", Opens to 2" Clamps to any surface up to 1" Thick
![]()
Locate, Map and verify conductor continuity
900-055 Can Wrench *$11.65
Popular Telecom tool, 3/8" and 7/16" hex ends,
Insulated body
900-057 Foot & Heel Grounding Strap $5
900-058 5" Straight Forceps $8.33
![]()
900-059 5" Curved Forceps $8.33
![]()
900-094 $1.67 parts grabber
900-115 $11.67 Glue Gun
900-118A $3.33 glue sticks for 900-115 gun (6)
900-119 $50 Heat Gun 1200 Watt with 2 settings 600 or 1000 degree F
900-145 $11.67 nozzle accessory for 900-119 heat gun
900-169 $2.92 Self-Loading Utility Knife
![]()
900-019 Miniature File Set $5.48
900-216 Heavy Duty 5 pc. Needle File Set $8
900-204 Tweezer Set 4 Piece $9 900-204.JPG
900-205 Pick Set 4 pc. $5.83
900-112 $2.08 Hobby Knife-Small
900-113 $2.08 Hobby Knife-Large
900-135 Cable Splicer Knife $10.83
900-140 Spudger $1.83
900-147 $25 Fish Tape 50 Ft
900-148 $33.33Fish Tape 100 Ft
900-149 $50 Fish Tape 200 Ft
900-150 $4.17 Tape Measure 16 Ft
900-202 $10 Wide Tape measure with magnet
900-151 $7.50 Tape Measure 25 Ft
900-154 $33.33 Conduit Bender 1/2"
900-154H $13.33
900-155 $50 Conduit Bender 3/4"
900-156 $66.67 Conduit Bender 1"
900-156H $16.67
900-171 $15 Magnet Attachment
900-172 $11.67 Hook Attachment
900-173 $15 Basket Head Attachment
900-174 $5 Replacement Pulling Tip
900-157 $18.83 Carbide Fiber Scribe - Chisel Point
900-158 $8.33 Automatic Center Punch
![]()
900-070 Mini-Wrench Set 5/32 to 7/16 inch $11.67
900-0217 $12.67 Mini combination wrench set (metric)
900-219 $6.67 Foam Swab Cleaning Kit
900-222 $8.50 Curved Insulated 6" Forceps
900-067 4" Adjustable Wrench $5.83 900-068 6" Adjustable Wrench $6 900-069 8" Adjustable Wrench $6.50
900-223 $8.17 Adjustable 10" Wrench
900-224 $11.67 Adjustable 12" Wrench
900-071 $3.17 Straight Tweezers
900-072 $3.17 Curved Tweezers
900-229 $16.67 Duragrip Wallboard Saw
900-234 $8.33 Coax flaring and installation tool
900-238 $33.33 Vacuum Pick-up tool
900-244 Banjo Adapter test 4,6,8 tel plug all in one tool $18.33
900-251 $5 900-251thru253
900-252 $6.25 900-251thru253
900-253 $7.33 900-251thru253
900-256 $6.67
900-257 $1.42
900-257b $0.97
900-258 $1.83
900-270 $9.17
![]()
![]()
![]()
900-162A $5.83 Die Cast Box 97mm x 50mm x 25mm
900-162B $7.08 Die Cast Box 118mm x 60mm x 40mm
900-162C $16.67 Die Cast Box 187mm x 107mm x 60mm
900-164A $8.33 Instrument Case 200mm x 160mm x 64mm
900-164B $11.67 Instrument Case 250mm x 190mm x 78mm
900-091A $2.92 parts tubes ( 3 pack)
900-176 $3.33 Syringe pack
(3)
900-177 $2.08 Fuse Puller
900-178
$6.67 Electrician's Knife *
900-179 $8.33 Hammer
900-183 $21.67 Multi-Stage
Drill Bit (Titanium Coated) 6 Step 3/16-1/2"
900-184 $43.33 Multi-Stage
Drill Bit (Titanium Coated) 8 Step 9/16-1"
900-185 $20 Multi-Stage Drill
Bit (Titanium Coated) 13 Step 1/8-1/2"
900-186 $80 Multi-Stage Drill
Bit (Titanium Coated) 10 Step 13/16-1and3/8"
900-187 $30 Multi-Stage
Drill Bit (Titanium Coated) 9 Step 1/4-3/4"
900-188 $43.33 Multi-Stage
Drill Bit (Titanium Coated) 12 Step 3/16-7/8"
Pliers & Cutters| Strippers| Crimpers| TOOL Kits| Punch Down Tools| Screwdrivers | Power Tools | Misc. Tools
TOOL CASES | PC Cable Tester | Eclipse NEW tool kits page
Eclipse warrants the purchaser ( end user) that the products will be of merchantable quality and free of defects for a period of 5 years from the time of sale
Satisfaction of this warranty is limited to replacement or repair of the defective product, at eclipse's discretion. Issuance of a credit for the defective goods shall occur only when the item is no longer available for replacement or it can not be repaired. The resolution of such a claim shall be at the discretion of Eclipse.
An original receipt of the sale dated sometime within the previous 5 years must accompany warranty returns. Purchaser must obtain a MRA # from Eclipse This number must be marked on all containers of returns.
CT50 CABLE TESTER,cable fault finder MEASURE: CABLE LENGTH up to 2500 FEET * MEASURE VOLTAGE up to 250 VOLTS * Identify and Find the Distance to an Open or Short in Seconds * Measure Cable Length in a Box, on a Spool or in a Wall * Transmit Tone Signals for Tracing Hidden Cable Runs * Measure Voltage to Identify Live Circuits * Extensive Built-in Library of Cable Types * Compatible with All Common Cables * Displays Length in Feet or Meters
FOR MORE ELECTRONIC PRODUCTSRETURN TO STARKELECTRONIC.COM HOME PAGE
TO SEND US AN E-MAIL CLICK HERE or GO TO THE HOW TO ORDER PAGE
STARK ELECTRONIC
444 FRANKLIN ST. WORCESTER, MA.01604
CALL 508-756-7136 FAX 508-756-5752 MON-FRI 8:30-5PM EASTERN TIME
TO ORDER PHONE, FAX, OR
We also have a secure way you can send payment online via PayPal
WE SHIP UPS ANYPLACE IN USA
WE ACCEPT
![]()
SEE OUR NEW CLOSE OUT SALES PAGE
SALES FLYER PAGE 1 >>>> PAGE 2 >>>>>