This page has many of the mounts you can use to attach the mast which holds an antenna to a building. Base mounts hold the bottom of a mast steady while you guy the top with guy wire.
Chimney Mounts use a set of straps and a bracket to hold a mast to a chimney. (sold as a set of 2)
Wall Mounts are sold in sets of 2 and extend out from the wall 3 inch to 18 inch depending on how big of an overhang your roof has. It is best to keep the antenna mast mounted as close to the wall as possible and spreading the set of mounts 3 feet or more apart will give you the most stable installation.
The Eave mount is a special wall mount that is used at the peak of a roof.
A vent mount will hold a mast to a pole or vent
CHIMNEY MOUNTS
Above EZ-29-18S Heavy Duty Chimney Mount with 18 ft Stainless Steel Straps $29.95

CM 9067 set of 2 brackets U-bolt Y-Type Chimney Mount
$18.95 per set
Up to 1 1/2" mast
18' stainless steel straps, double rivet.
CHIMNEY MOUNT INSTRUCTION SHEET looks better in PDF INSTRUCTION SHEET IN PDF
9067 set of 2 brackets U-bolt Y-Type Chimney Mount
Up to 1 1/2" mastCHIMNEY MOUNT
NO MORE CM 9039 now we only have EZ-19 $9.95 Roof Mount, Fits up to 1 1/4 "Tubing EZ-19 Base
Channel Master #3092 Tripod 3 feet $34.95
PVTP-3 3 ft Tripod $24.95 plus shipping
PVTP-5 5 ft
Tripod $39.95 plus shipping
9139 $2.99 Pitch Pad and Lag Bolt Kit
3 pitch pads
6 lag bolts (2" x 1/4")
TR-2000
$35 DSS Antenna tripod mount This kit includes
removable legs, ground anchor and bungee cord. Perfect for any location
where permanent mounting is not desirable. Pole and legs separate from base
unit.
WINEGARD # DS-1111 $16.95 "Easy Install" Antenna Mount Convenient off-air mount fits on most standard satellite dish mounts.
Convenient off-air mount fits on most standard satellite dish
mounts.
MORE
INFORMATION
TO SEND US AN E-MAIL CLICK HERE
This mount has the same type of foot to attach to a roof or wall as the standard DSS antenna mount. The DS3000 has a longer pole so you can get a few feet higher.
DS-2000 is about the same as the DS3000 but has a shorter pipe ( about 18") Cost $10.34 plus shipping
9000 Vent Mount discontinued
9001 Vent Mount $14.95 NOW EZ-70W
9002 Vent Mount $7.99
9013 Base mount DISCONTINUED BUT WE HAVE A MOUNT JUST LIKE IT FROM GC as # 8622 $4.95 ea
9014 Base Mount $4.95
9016 H.D.Wall Mount discontinued
9023 Wall Mount $4.99 IN STOCK AS CM 3079 which is the blister pack # for 9023
9025 H.D. Wall Mount will hold up to 2 1/2" Mast $7.99
9030A Eave Mount Adjustable 45" to 60" $24.95
9032 Wall Mount 6" $10.95
9034 Wall Mount 12" $16.95
9036 Wall Mount 18" $22.95
9039 Base Mount DISCONTINUED USE EZ-19 $9.95
9064 H.D. Chimney Mount 12 ft straps discontinued use 9067
9066 H.D. Chimney Mount 18 ft straps discontinued use 9067
9067 chimney mount 18 ft. $18.95
9073 Ratchet Chimney Mount 18 ft. Discontinued use 9067
Channel Master offers one of the most extensive lines of mounting hardware and related accessories available from any single manufacturer. The quality and reliability of our products have been field proven since 1949. Whether you are a professional installer or a do-it-yourselfer, you can trust that Channel Master has the installation product you need to complete the job.
ANTENNA Mounts
BASE MOUNTS
9014 $4.95 Universal Swivel Base Mount Up to 1 1/2" mast NOW CM #3078 BASE MOUNT $4.95
NO MORE CM 9039 now we only have EZ-19 $9.95 Roof Mount, Fits up to 1 1/4 "Tubing EZ-19 Base
WALL MOUNTS

EZ-WB4 Eazy Up 4" Heavy Duty Wall mount set ( 2 brackets in Set) holds mast that is up to 1-3/4" Dia. $7.99 ea set
9023 $4.99 set of 2 brackets 4" Wall Mount IN STOCK AS CM
3079 which is the blister pack # for 9023
Up to 1 1/2" mast
Lag bolts included
9025 $7.99 set of 2 brackets 3" Heavy-Duty Wall Mount
Up to 2 1/2" mast
Lag bolts included
9032 $10.95 set of 2 brackets 6" Heavy-Duty Wall Mount
Up to 1 1/2" mast
Lag bolts included
9034 $16.95 set of 2 brackets 12" Wall Mount
9036 $22.95 set of 2 brackets 18" Wall Mount
Up to 1 1/2" mast
Lag bolts included CM WALL MOUNT
CM #9036 18" WALL MOUNT $22.95
EZ30-24 Wall Mount 24" snap in type $29.95 set of 2 brackets
EAVE MOUNT
EASY UP EZ 31 Adjustable Eave Mount 45"- 60 " $24.95
9030 $24.95 set of 2 brackets Adjustable Eave Mount
Adjustable from 45" to 60"
Up to 2 1/2" diameter mast
VENT MOUNTS
$14.95 set of 2 brackets Vent Mount
CM #9001 VENT MOUNT was discontinued we now have EZ70W which will attach to a pipe that is from 4" to 6"
GC 8799 $7.99 ea Vent Mount
Up to 1 1/4" mast
Up to 3" pipe
CHIMNEY MOUNTS

CM 9067 set of 2 brackets U-bolt Y-Type Chimney Mount
$18.95 per set
Up to 1 1/2" mast
18' stainless steel straps, double rivet.
CHIMNEY MOUNT INSTRUCTION SHEET
9067 $18.95 set of 2 brackets U-bolt Y-Type Chimney Mount
9139 $2.99 Pitch Pad and Lag Bolt Kit
3 pitch pads
6 lag bolts (2" x 1/4")
CM 9015 discontinued we only have 2 way guy clamps now $1.19 ea set #15-827
below
Up to 2" masts
Eyebolts included
PE 15-835 Guy Ring and Clamp $1.76 ea
15-850 cable Clamps $5.29 for a package of 4 clamps
9017 $2.99 ea U-bolt and Nest Assembly
CM # 3094 Small Turnbuckles $1.99 per package of 2
MORE TV ANTENNA HARDWARE INFO
FOR ALL TV ANTENNA PAGE>>>>>
FOR ALL TV ANTENNA PREAMPS (BEST WAY TO IMPROVE YOUR PICTURE QUALITY)>>>
RETURN TO CM INDEX PAGE
FOR MORE ELECTRONIC PRODUCTS
RETURN TO STARKELECTRONIC.COM HOME PAGE with product search
STARK ELECTRONIC
444 FRANKLIN ST. WORCESTER, MA.
CALL 508-756-7136 FAX 508-756-5752 MON-FRI 8:30-5PM EASTERN TIME
WE SHIP UPS ANYPLACE IN USA
WE ACCEPT

![]()

PHONE 508-756-7136 FAX 508-756-5752 TO SEND US AN E-MAIL CLICK HERE or GO TO THE HOW TO ORDER PAGE
TO ORDER PHONE, FAX, OR EMAIL
SEE OUR NEW CLOSE OUT SALES PAGE
SALES FLYER PAGE 1 >>>> PAGE 2 >>>>>