|View Product Specs|
|G86TCG $34.95 EA order below||G86TG $26.95 EA order below|
|8" speaker combination with volume level control, 6 oz. magnet, dual 70V/25V, 5 watt transformer and white metal grille||8" dual cone speaker with 70V/25V transformer and white metal grille|
|View Product Specs|
IN-CEILING ENCLOSED SPEAKER SYSTEM
SP-6ECS 6 1/2" In-Ceiling Enclosed Speaker System
SP-8ECS 8" In-Ceiling Enclosed Speaker System
SP-CT8/T 8" 70/25V Ceiling Tile Speaker $116 ea
Speco Technologies new Ceiling Tile Speaker is the perfect solution for commercial sound applications that require speed of installation, aesthetics and superior sound performance.
With the SP-CT8/T, installation is lightning quick and easy requiring only the connecting of speaker wire to the units push-button terminals then selecting the proper wattage setting on the transformer dial, then just lay the speaker in an established drop-ceiling.
Countless time, and money is saved by the efficient installation-friendly design eliminating the labor-intensive task of cutting mounting holes in ceiling tiles. This is usually required for standard speaker installations.
The speakers smooth vent-facade design blends seamlessly with any commercial drop-ceiling environment and provides an ample gateway for wide sound dispersion. This visual design is matched by the high performance of the SP-CT8/Ts flat frequency curve and wide response range.
Made of durable components and furnished complete with a support crossbar rail, the SP-CT8/T will provide countless years of reliability and sound performance.
Technical Specifications: Woofer 8" Polypropylene with rubber surround * Tweeter 3/4" Mylar dome tweeter * Frequency Response 50Hz-20kHz * Max Power 30 Watts RMS/ 60 Watts RMS * Sensitivity 90 +/- 3dB * Impedance 8 ohms * Selector Switch 70/25 Volt Transformer Settings 20, 10, 5, 2.5, 1.25, and 8 ohms * Dimensions 23" W x 23"H x 6"D Weight 7.1 lbs. Accessories 2' Drop-ceiling crossbar rail included
SPECO AUDIO INSTALLATION BOOK
COMMERCIAL audio overview
What is a 70 Volt Sound System & what is it used for?
A 70 Volt Sound System is comprised of amplifiers, speakers with transformers, microphones, volume controls, a telephone system interface and an assortment of wires used as connections. It is generally used for commercial sound applications where there is a necessity for electronically amplifying and distributing sound for the functions of paging, playing music and/or pre-recorded messages to a commercial environment.
What are the components that make up a 70 Volt Sound System?
Centralized Amplifier: The central unit of a 70 Volt System is the amplifier that amplifies the sound signal to be distributed to pre-established speakers or paging horn loudspeakers. There are power amplifiers, which are rack-mountable and have no external controls, and packaged amplifiers, which have pre-amp features such as volume controls, bass and treble controls, etc., that are built into the amplifier to make it a pre-amplifier and amplifier all in one unit. Amplifiers have many diverse features and many input and output connections. They can feature XLR MIC Connectors or MIC terminal strip connections, auxiliary/RCA inputs for music sources, and 600 ohm telephone inputs. Most commercial amplifiers have speaker outputs for 4/8/16 ohms and 70V systems. Most Speco Technologies amplifiers offer a Music on Hold output feature to allow customers on hold to hear music or prerecorded advertising.
Speakers: There are several different types of speakers including in-ceiling, in-wall, baffle and flush-mount cone speakers or horn loudspeakers. Optimal speaker selection for each installation can depend on the application the speaker is needed for. It can also depend upon the area that is needed to be covered, the ambient noise level of the environment, whether the application for the speaker will be foreground/background music or voice, and whether the speaker will be used indoor or outdoor. For commercial applications in a 70 Volt System, the speaker must have a transformer mounted on it to be used.
Transformers: The transformers that are used on 70 Volt System speakers are step-down transformers that convert the high-voltage/low-current coming from the amplifier to the low-voltage/high-current signal that makes the speaker work. Each transformer usually has multiple wattage taps so that each speaker can be individually set as to how much wattage will enter the speaker, and, because of this, how loud each speaker will be. The benefits of using transformers are listed on the next page. Transformers can be sold individually to be mounted on a speaker or premounted already on a speaker.
Phone System Interface Device: These systems are used to connect a phone system to the speaker system via the amplifier for paging purposes.
Microphones: Located in the front end of the system to receive the delivered sound, microphones are low impedance devices that require a shielded cable so as to not to interfere with the amplifier or speaker wires.
Wires: Generally speaking, speaker wire is determined by the length of the run and wattage utilized:
For wire runs less then 50 ft. and 50 Watts of power or less use 16 wire gauge.
For wire runs more than 50 ft. or over 50 Watts of power use 14 gauge wire.
Volume Controls/Attenuators: Allows adjustment of volume to speakers.
What are the Benefits of Using a 70 Volt Sound System?
A 70 Volt System uses a basis of high voltage to result in a lower current when distributing power to a sound system. Since Power equals Voltage times Current, a higher voltage will result in a lower current needed to arrive at a desired power load. This prevents long runs of wire from getting overheated by not having excessive, wasted current. This makes 70 Volt Systems very energy efficient. Many municipalities in America actually require the use of 25 Volt transformers because the municipalities' electrical codes classify a 25 Volt system as low voltage, thus making it safer.
Generally speaking, 70 Volt Systems are much more cost efficient than an 8 ohm speaker system when dealing with the volume installation of speakers.
70 Volt Systems are easier to design than 8 ohm speaker systems. The designer does not have to worry about keeping the impedance matched throughout their speaker system as they would on an 8 ohm based system. 70 Volt Systems can have their speakers daisy chained in parallel together without worry. Because 70 Volt speakers come with transformers, impedance is not an issue unless an extreme amount of speakers are installed together. (It is recommended to use multiple wire runs back to your amplifier as opposed to a single run.) This will make locating problems that occur easier to find by isolating it on individual small speaker runs where it can be quickly located.
Also it is an easy calculation in determining the amount of wattage needed by your amplifier. You will take the total wattage
equirement of your 70 Volt speakers, or "load", and include a 20% safety buffer to the upside arriving at the minimum RMS wattage your amplifier should have.
70 Volt Systems allow you to set the volume of each individual speaker by letting you customized the wattage taps on the speakers for the specific volume needed in your specific sound area. The higher the wattage taps are set on individual speakers, the more power the speaker consumes, the louder the speaker will be. The transformer on the speaker also serves as a safeguard to make sure individual speakers are not ruined by excessive wattage.
speco AUDIO PDF CATALOG
INDEX OF PAGES for SPECO FLYER
FOR MORE ELECTRONIC PRODUCTS
RETURN TO STARKELECTRONIC.COM HOME PAGE
TO SEND US AN E-MAIL CLICK HERE
STARK ELECTRONICCONTACT INFORMATION WE SHIP UPS ANYPLACE IN USA